15kV  EPR/Copper Tape Shield/PVC 

Medium-Voltage Power, Shielded

UL Type MV-105, 133% Ins. Level, 220 Mils

Applications

• Superior performance in petrochemical plants, pulp and paper mills, sewage and water treatment plants, environmental protection systems, railroads, mines, utility power generating stations, steel mills, textile plants and other industrial three phase applications

• For use in wet or dry locations when installed in accordance with NEC

• For use in aerial, conduit, open tray and underground duct installations

• For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4 (A) (5)

Product Features

• Rated at 105C

• Excellent heat and moisture resistance

• Excellent flame resistance

• Outstanding corona resistanc

• Flexibility for easy handling

• High dielectric strength

• Low moisture absorption

• Electrical stability under stress

• Low dielectric loss

• Chemical-resistant

• Meets cold bend test at -35C

Compliances

• National Electrical Code (NEC)

• UL 1072

• ICEA S-93-639/NEMA WC74

• ICEA S-97-682

• AEIC CS8

• UL listed as Type MV-105 for use in accordance with NEC

• UL 1685 (Sizes 1/0 AWG and larger) UL Flame

Exposure Test

• Sizes 1/0 AWG and larger are listed and marked “Sunlight-Resistant FOR CT USE” in accordance with NEC

• IEEE 1202 (70,000 BTU/hr)/CSA FT4

• Meets EPA 40 CFR, Part 2671 for leachable lead content per TCLP method

• OSHA acceptable

Optional Flame Tests:

• ICEA T-29-520 (210,000 BTU/hr)